With the higher and higher requirements for the decoration style, the details of the furniture design control should also pay more attention. According to statistics, the choice of floating mount tv stand is in trend. The wall-mounted TV stand is high value, but installation requirements are very high. The following Casa Custom shares this knowledge with you.
Floating mount tv stand design
First, how to fix the wall-mounted TV cabinet?
TV stand fixing on the wall generally has two methods, one is the snap type, if this is the method, then just lift the TV stand up to the rack, and then lock it stably.
There is a direct fixed on the wall by screws, on the TV stand background wall to inset wedge anchors, and then fixed with anchors.
Second, what needs to pay attention to after the wall floating tv stand installation?
After the installation of the TV hanger rack, and handling the wiring, this processing is a little difficult and needs some skills, so Casa Custom suggests leaving enough space for the wiring before the installation, and follow with the instructions of the guide.
Third, how to install a wall floating TV stand?
1, First of all, have to prepare the tools for installation and pay attention to the quality of the hanger racks and hardware.
2, If the background is the marble wall choose a glass driller to drill holes, after that can install wedge anchors until tightened into the wall. For patterned marble, drilling should be extremely careful. For the Glass background wall after the selected location, first use the glass drill holes, thence with impact drilling inside the brick wall, choose large screws as filling, and then tighten the screws for fixing.
3、If it is an ordinary brick wall, no special tools and techniques are needed, just punch holes in the wall, screws, and hang the TV stand. If it is a gypsum board wall, need to choose a good positioning point, use a hobby knife to drill a hole in the center of the fixed point, and then put a 2cm thick long wooden slat on the upper hole of the hanging frame, so that the self-tapping screws through the gypsum board and into the wooden slats, so that the force area increased.
Floating mount tv stand design in PVC
This is the wall floating TV stand installation point, because it is a floating design, if the installation is not done well, during the daily use of the process may encounter problems such as falling, so the installation deserves to pay attention for it.